2.2 kW Solar Pump Inverter, DC/AC Input to 3ph AC Output
Favorable price 2.2 kW 3 hp PV / solar pump inverter, DC supply & AC 220v 1-phase power supply switchable solar pump VFD, DC 200V-350V input to 3 phase AC 220/230/240V output, adopts max power point tracking to maximize power output from solar modules.
High quality 2.2kW / 3 hp solar pump inverter, DC or single phase AC input to 0~input voltage three phase AC output for submersible pump.
|Capacity||2.2 kW (3 hp)|
|Product dimension||189.5*167*120 mm|
|Input Feature||Input voltage||DC 260~350V, recommend DC 300~350V for 3-phase 220/230/240V motor
Single phase AC 220V ±15%
|Vmp/Voc voltage||VMP≥280V, voc≤400V|
|Rated input current||23 A|
|Input frequency||47~63 Hz|
|Input power of solar panel||About 1.5 times the solar pump inverter rated power|
|Output Feature||Output voltage||Three phase 0~rated input voltage|
|Rated output current||9.6 A|
|Output frequency||50Hz/ 60Hz (output 0-300Hz please contact us)
DC 270~320V corresponds to 0-50Hz for 220V AC
|Control||Control mode||SVPWM, SVC|
|Motor type||Asynchronous motor|
|Speed ratio||Asynchronous motor 1:100 (SVC)|
|Speed control accuracy||±0.2%(SVC)|
|Torque response||<20ms (SVC)|
|Torque control accuracy||10%(SVC)|
|Starting torque||0.25 Hz / 150% (SVC)|
150% of rated current: 1 minute
|Running control||Frequency setting method||Digital settingAnalog setting
Pulse frequency setting
Multi-step speed running settingSimple PLC setting
PID setting, MODBUS communication setting
Shift between the set combination and set channel
|Operation method||Keyboard/ terminal/ communication|
|Auto-adjustment of voltage||Keep a stable voltage automatically when the gird voltage transients|
|Fault protection||Overcurrent, overvoltage, undervoltage, overheating, phase loss, overload, etc.|
|Special functions for PV water pumps||Maximum power tracking, pre-warning at weak light, auto wake up at strong light,
Pre-warning when full water, auto wake up at low water level,
Underload pre-warning and protection of water level sensor,
When pre-warning, the inverter is in stand-by
|Environment||Environment temperature||-10℃~40℃ (environment temperature is among 40℃~50℃; please use it with derating)|
|Environment humidity||Less than 90 % R.H, not exceeding 90% R.H|
|Altitude, Vibration||Below 1000 m, below 5.9m/s² (=0.6g)|
|Cooling method||Forced cooling and natural air cooling|
|Enclosure rating||IP 20|
- Solar pump inverter adopts advanced MPPT control technology, real-time detection of solar panels power voltage, tracking the highest voltage and current, efficiency is as high as 98%.
- It can enter automatically to sleep mode when the intensity of sunlight is weak, as well as can exit the sleep mode when the intensity of sunlight is becoming strong.
- Automatic sleep when on high-water level and automatic restart when on low-water level to realize automatic control through water level.
- Multiple power supply design, power input can be solar energy photovoltaic DC power supply (DC 260 ~ 350V, DC 450~750V), can also be single phase or three phase AC power, simple wiring.
- Smart operation, water level detection and operation panel to prevent overflow, dry pumping.
- Protect itself in trouble and improve the reliability of whole system.
- The bypass- AC source which runs automatically when the sun is Not sufficient or absent.
Tips: Solar pump inverter selection
The solar water pump is not like the pump powered by the conventional AC grid. Because the electricity generated by the photovoltaic module is the direct current, it is required to invert the direct current into a three-phase alternating current for being used by the water pump through the inverter. Then, the solar pump inverter special for PV water pumps should be selected with high reliability and high system efficiency. The capacity of the solar pump inverter must meet the heavy-duty startup of the selected pump. If it is used the highland area, the capacity reduction caused by the high altitude must be taken into account, so as to ensure the long-term and reliable operation of the system. In normal conditions, the power of the solar pump inverter is required to be one stage higher than that of the water pump motor.
Solar Pump Inverter - 2.2Kwp
- Brand: Nano Power
- Product Code: Solar Pump Inverter - 2.2Kwp
- Availability: In Stock
- Ex Tax: Tk.58,000
Tags: Solar Pump Inverter - 2.2Kwp, inverter, solar pump, solar water pump, irrigation pump, solar, inverter